Search Results

An innovative nonlinear simulation approach for high power density synchronous generator systems is developed and implemented. Due to high power density, the generator operates in nonlinear region of the magnetic circuit. Magnetic Finite Element Analysis (FEA) makes nonlinear simulation possible. Neural network technique provides nonlinear functions for system level simulation. Dynamic voltage equation provides excellent mathematical model for system level simulations. Voltage, current, and flux linkage quantities are applied in Direct-Quadrature (DQ) rotating frame. The simulated system includes main machine, exciter, rectifier bridge, bang-bang control, and PI control circuitry, forming a closed loop system. Each part is modeled and then integrated into the system model.

Preliminary investigations of nonlinear modeling of aircraft synchronous generators using neural networks are presented. Aircraft synchronous generators with high power density tend operate at current-levels proportional to the magnetic saturation region of the machine's material. The nonlinear model accounts for magnetic saturation of the generator, which causes the winding flux linkages and inductances to vary as a function of current. Finite element method software is used to perform a parametric sweep of direct, quadrature, and field currents to extract the respective flux linkages. This data is used to train a neural network which yields current as a function of flux linkage. The neural network is implemented in a Simulink synchronous generator model and simulation results are compared with a previously developed linear model. Results show that the nonlinear neural network model can more accurately describe the responsiveness and performance of the synchronous generator.

Driving at large angles of sideslip does not necessarily indicate terminal loss of control, rather, it is the fundamental objective of the sport of drifting. Drift racing challenges drivers to navigate a course in a sustained sideslip by exploiting coupled nonlinearities in the tire force response. The current study explores some of the physical parameters affecting drift motion, both in simulation and experiment. Combined-slip tire models are used to develop nonlinear models of a drifting vehicle in order to illustrate the conditions necessary for stability. Experimental drift testing is conducted to observe the dynamics featured in the track data. An accelerometer array on the test vehicle measures the acceleration vector field in order to estimate the vehicle states throughout the drift testing. Neural networks are used to identify the patterns in the accelerations that correspond to sideslip excursions during drifts.

Optimizing IC engine performance currently requires an exhaustive experimental search to determine the combination of internal components that maximizes torque or power. An alternate and more structured approach using Response Surface Methods will lead the experimenter to the optimum combination with the least number of trials. Using simulation software to evaluate IC engine configurations, this method improved the estimated power from 439 to 516 KW. Results of the study indicate that Response Surface Methods are a viable and robust method of converging to an IC engine configuration which achieves optimum performance.

This paper demonstrates that the on-resistance of a power MOSFET decreases significantly when the operating temperature decreases. The decrease in on-resistance under cryogenic temperature allows the device to operate at a much higher power and current condition. Also, it is demonstrated that the MOSFET device can be effectively kept at cryogenic temperature by spray cooling with liquid nitrogen. Over 80 W of heat generated can be removed continuously with spray cooling.

Precision glass molding process is an attractive approach to manufacture small precision optical lenses in large volume over traditional manufacturing techniques because of its advantages such as low cost, fast time to market and being environment friendly. In this paper, we present a physics-based computational tool that predicts the final geometry of the glass element after molding process using the finite element method. Deformations of both glass and molds are considered at three different stages: heating, molding, and cooling. A 2D axisymmetric finite element model is developed to model the glass molding process. The proposed modeling technique is more efficient than the all-in-one modeling technique. The molds are assumed to be rigid, except for thermal expansion, at all time and glass treated as a flexible body during the compression. Details on identifying material parameters, modeling assumptions, and simplifications are discussed.

The application of Statistical Process Control and Design of Experiment methods in the research laboratory can lead to significant gains in the Powertrain development process. Empirical methods such as Design of Experiments, Regression, and Neural Network techniques can be applied to help researchers gain better understanding of the cause and effect relationships of emission, alternative fuel source, performance, fuel economy, and engine management system - calibration studies. The use of these empirical modeling techniques along with model based Genetic Algorithm, Gradient, or Constraint based solution search methods will help identify the “process settings” that improve fuel economy, improve performance, and reduce pollutants. Since empirical methods are fundamentally based on the acquired test data, it is vitally important that the laboratory measurements are repeatable, consistent, and void of sources of variance that have a significant effect on the acquired test data.

The making of a quilt is an interesting process. Historically, a quilt is a canvas of work made from old pieces of cloth cut into squares or whatever shape that make a nice connected pattern and then stitched together. The quilt could be random pieces that is not related to each other. In most recent years and more common cases, a quilt is made of different pieces of patches that are connected and laid out in a special way to tell a story. Not only does it portray a story that is put together in a certain sequence, but it also stiches the pieces of the quilt into a nice and complete narrative. A story that one can understand just by looking at the quilt spread and unfolded. Much like the making of a quilt that has a story to tell, a Product Digital Quilt will tell the story of a product. The Digital Product Quilt replaces the conventional way of telling a product story. The traditional product story is a method that is serially connecting multiple product life cycle silos together.

A sub-scale testbed for characterizing the dynamic performance of regenerable adsorbents for filtering trace contaminants (TCs) from cabin atmospheres was built and tested. Regenerable adsorbents employed in pressure-swing adsorption (PSA) systems operate in a dynamic environment, where they undergo repeated loading / regeneration cycles. Adsorbents have a given chemical specificity for non-methane TCs depending on their composition, and on the humidity and temperature at which they operate. However, their ability to filter TCs is also affected by contact time, cycle time, regeneration vacuum quality and thermal conditioning.

In this study we consider the coordinated exploration of an unfamiliar Martian landscape by a swarm of small autonomous rovers, called Swarmies, simulated in a distributed setting. With a sustainable program of return missions to and from Mars in mind, the goal of said exploration is to efficiently prospect the terrain for water meant to be gathered and then utilized in the production of rocket fuel. The rovers are tasked with relaying relevant data to a home base that is responsible for maintaining a mining schedule for an arbitrarily large group of rovers extracting water-rich regolith. For this reason, it is crucial that the participants maintain a wireless connection with one another and with the base throughout the entire process. We describe the architecture of our simulation which is composed of HLA-compliant components that are visualized via the Distributed Observer Network tool developed by NASA.

In this paper, we introduce the use of ontologies to implement the information developed and organized by resource planning tools into standard project management documents covering integrated cost, resource modeling and analysis, and visualization. The basic upper ontology used for NASA Space Operations is explained and the results obtained are discussed. This ontology-centered approach is looking for tighter connections between software, hardware, and systems engineering.

The efficiency in energy consumption of an electric vehicle (EV) has significant value to both vehicle manufacturers and vehicle owners. Such efficiency will directly impact the cost of energy and vehicle range while relieving the stringent requirements on the DC motor and battery specs. Nowadays, with the development of advanced driver assistance systems (ADAS), such as adaptive cruise control (ACC) or cooperative adaptive cruise control (CACC), drivers enjoy a much safer driving experience. ADAS capabilities in sensory, computing and communication can be leveraged in EVs for the purpose of optimizing energy consumption. This paper introduces an energy-optimized ACC platform, which utilizes a forecast of the speed profile of the host vehicle in a short (few seconds) horizon. Such speed information can be available through ADAS or similar systems. This paper focuses on optimization in longitudinal tracks.

The Weapon Combat Effectiveness (WCE) analytics is very expensive, time-consuming, and dangerous in the real world because we have to create data from the real operations with a lot of people and weapons in the actual environment. The Modeling and Simulation (M&S) of many techniques are used for overcoming these limitations. Although the era of big data has emerged and achieved a great deal of success in a variety of fields, most of WCE research using the Defense Modeling and Simulation (DM&S) techniques studied have considered a lot of assumptions and limited scenarios without the help of big data technologies. Furthermore, WCE analytics using previous methodologies cannot help but get the bias results. This paper reviews and combines the basic knowledge for the new WCE analytics methodology using big data and M&S to overcome these problems of bias. Then this paper reviews the general overview of WCE, DM&S, and big data.

The goal of this project was to investigate how to make driver distraction state classification more efficient by applying selected machine learning techniques to existing datasets. The data set used in this project included both overt driver behavior measures (e.g., lane keeping and headway measures) and indices of internal cognitive processes (e.g., driver situation awareness responses) collected under four distraction conditions, including no-distraction, visual-manual distraction only, cognitive distraction only, and dual distraction conditions. The baseline classification method that we employed was a support vector machine (SVM) to first identify driver states of visual-manual distraction and then to identify any cognitive-related distraction among the visual-manual distraction cases and other non-visual manual distraction cases.

The aim of this work is to apply an innovative adaptive ℒ1 techniques to control flutter phenomena affecting highly flexible wings and to evaluate the efficiency of this control algorithm and architecture by performing the following tasks: i) adaptation and analysis of an existing simplified nonlinear plunging/pitching 2D aeroelastic model accounting for structural nonlinearities and a quasi-steady aerodynamics capable of describing flutter and post-flutter limit cycle oscillations, ii) implement the ℒ1 adaptive control on the developed aeroelastic system to perform initial control testing and evaluate the sensitivity to system parameters, and iii) perform model validation and calibration by comparing the performance of the proposed control strategy with an adaptive back-stepping algorithm. The effectiveness and robustness of the ℒ1 adaptive control in flutter and post-flutter suppression is demonstrated.